RNS 510 Kablo Bağlantı Açıklaması

Passat Turkiye Google Passat Turkiye Google

Konuyu Değerlendir: Güncel Değerlendirme :

  1. #1
    offline
    sedat27 - ait Kullanıcı Resmi (Avatar)
    Adı
    Sedat
    Üyelik Tarihi
    16/02/2011
    Yer
    İstanbul
    Yaş
    43
    Model
    CC
    Motor
    1.2 TSI
    Yılı
    2021
    Mesajlar
    2.221
    34 EKT 388

    Lightbulb RNS 510 Kablo Bağlantı Açıklaması

    Passat Turkiye

    Multi-pin connector 1, 8-pin, for loudspeaker outputs
    Passat Turkiye

    1 � Rear right loudspeaker, positive
    2 � Front right loudspeaker, positive
    3 � Front left loudspeaker, positive
    4 � Rear left loudspeaker, positive
    5 � Rear right loudspeaker, negative
    6 � Front right loudspeaker, negative
    7 � Front left loudspeaker, negative
    8 � Rear left loudspeaker, negative

    Note! When used with a sound amplifier, the same pin assignments are used as line-in for the sound amplifier. To achieve this, the radio unit is programmed from �output stage power 26 dB� to �output stage line-out 12 dB� in the factory. Details on how to perform this can be found in Volkswagen RNS 510 coding when installing with a factory amplifier.


    Multi-pin connector 2, 8-pin, for voltage supply lines and CAN bus
    Passat Turkiye

    9 � CAN bus, high
    10 � CAN bus, low
    11 � Display voltage supply, positive, optional for radio module low version only
    12 � Voltage supply, negative, terminal 31
    13 � Display HV CAN bus low, optional for radio module low version only, not for midline
    14 � Display HV CAN bus high, optional for radio module low version only, not for midline
    15 � Voltage supply, positive, terminal 30
    16 � Anti-theft coding control signal, SAFE, positive


    Multi-pin connector 3, 12-pin, for telephone and microphone signals


    1 � Microphone input, negative
    2 � AUX output, audio, right
    3 � AUX output, common signal earth
    4 � Microphone output, negative
    5 � Telephone audio input signal left, negative
    6 � Telephone audio input signal right, negative
    7 � Microphone input, positive
    8 � AUX output, audio, left
    9 � Microphone output, positive
    10 � Telephone mute (mute switch for radio)
    11 � Telephone audio input signal left, positive
    12 � Telephone audio input signal right, positive
    Multi-pin connector 4, 12-pin, for CD changer control and CD audio input signals

    1 � AUX signal input, left
    2 � AUX signal earth
    3 � CD changer, audio signal earth
    4 � CD changer, voltage supply, positive, terminal 30, contact continuous load greater than 1 A, temporary peak load 5 A
    5 � Not assigned
    6 � CD changer, DATA OUT (data exchange for CD changer control from radio navigation system to CD changer)
    7 � AUX signal input, right
    8 � CD changer, left audio channel, CD/L
    9 � CD changer, right audio channel, CD/R
    10 � CD changer, control line, switched positive
    11 � CD changer, DATA IN (data exchange for CD changer control from CD changer to radio navigation system)
    12 � CD changer, CLOCK (internal check protocol for data flow monitoring)

    Multi-pin connector 5, audio and video, 26-pin

    1 � Reserved for Debug RX protocol
    2 � Reserved for Debug TX protocol
    3 � Not assigned
    4 � Video signal input, RGBS, negative (ground)
    5 � Video signal output LF, Right (Audio use 17 for ground)
    6 � Ground Sync input
    (Internal universal preparation for mobile telephone, mobile telephone detection)
    7 � Video signal output, vertical and horizontal synchronisation
    (Internal universal preparation for mobile telephone, cradle and button evaluation)
    8 � Video signal ouput, green
    (Internal universal preparation for mobile telephone, cradle, aerial diagnosis)
    9 � Video signal input, RGBS, negative (ground)
    10 � Video signal input LF, right (Audio use 24 for ground)
    11 � Video signal input, screening earth
    12 � Video signal input, vertical and horizontal synchronisation
    13 � Video signal input, green
    14 � Not assigned
    15 � Not assigned
    16 � Not assigned
    17 - Video signal output, LF, negative (ground)
    18 � Video signal output LF, Left (Audio use 17 for ground)
    19 � Video signal output, RGBS, negative (ground)
    (Internal universal preparation for mobile telephone, cradle, negative)
    20 � Video signal output, Blue
    (Internal universal preparation for mobile telephone, switched terminal 30)
    21 � Video signal output, Red
    22 � Video signal input, LF, negative
    23 � Video signal input, LF, left (Audio use 24 for ground)
    24 � Video signal input, RGBS, negative (ground)
    25 � Video signal input, blue
    26 � Video signal input, red

    Connectors 6, aerial connectors
    1 � AM and FM2 radio reception aerial connector, double Fakra, no coding, impedance 50 ohms, colour cream-white

    2 � FM1 radio reception aerial connector, double Fakra, coding B, impedance 50 ohms, colour cream-white

    3 � Navigation aerial connector, double Fakra, coding C, impedance 50 ohms, colour signal blue
  2. #1
    offline
    sedat27 - ait Kullanıcı Resmi (Avatar)
    Mesajlar :

    2.221

    Passat Turkiye

    Multi-pin connector 1, 8-pin, for loudspeaker outputs
    Passat Turkiye

    1 � Rear right loudspeaker, positive
    2 � Front right loudspeaker, positive
    3 � Front left loudspeaker, positive
    4 � Rear left loudspeaker, positive
    5 � Rear right loudspeaker, negative
    6 � Front right loudspeaker, negative
    7 � Front left loudspeaker, negative
    8 � Rear left loudspeaker, negative

    Note! When used with a sound amplifier, the same pin assignments are used as line-in for the sound amplifier. To achieve this, the radio unit is programmed from �output stage power 26 dB� to �output stage line-out 12 dB� in the factory. Details on how to perform this can be found in Volkswagen RNS 510 coding when installing with a factory amplifier.


    Multi-pin connector 2, 8-pin, for voltage supply lines and CAN bus
    Passat Turkiye

    9 � CAN bus, high
    10 � CAN bus, low
    11 � Display voltage supply, positive, optional for radio module low version only
    12 � Voltage supply, negative, terminal 31
    13 � Display HV CAN bus low, optional for radio module low version only, not for midline
    14 � Display HV CAN bus high, optional for radio module low version only, not for midline
    15 � Voltage supply, positive, terminal 30
    16 � Anti-theft coding control signal, SAFE, positive


    Multi-pin connector 3, 12-pin, for telephone and microphone signals


    1 � Microphone input, negative
    2 � AUX output, audio, right
    3 � AUX output, common signal earth
    4 � Microphone output, negative
    5 � Telephone audio input signal left, negative
    6 � Telephone audio input signal right, negative
    7 � Microphone input, positive
    8 � AUX output, audio, left
    9 � Microphone output, positive
    10 � Telephone mute (mute switch for radio)
    11 � Telephone audio input signal left, positive
    12 � Telephone audio input signal right, positive
    Multi-pin connector 4, 12-pin, for CD changer control and CD audio input signals

    1 � AUX signal input, left
    2 � AUX signal earth
    3 � CD changer, audio signal earth
    4 � CD changer, voltage supply, positive, terminal 30, contact continuous load greater than 1 A, temporary peak load 5 A
    5 � Not assigned
    6 � CD changer, DATA OUT (data exchange for CD changer control from radio navigation system to CD changer)
    7 � AUX signal input, right
    8 � CD changer, left audio channel, CD/L
    9 � CD changer, right audio channel, CD/R
    10 � CD changer, control line, switched positive
    11 � CD changer, DATA IN (data exchange for CD changer control from CD changer to radio navigation system)
    12 � CD changer, CLOCK (internal check protocol for data flow monitoring)

    Multi-pin connector 5, audio and video, 26-pin

    1 � Reserved for Debug RX protocol
    2 � Reserved for Debug TX protocol
    3 � Not assigned
    4 � Video signal input, RGBS, negative (ground)
    5 � Video signal output LF, Right (Audio use 17 for ground)
    6 � Ground Sync input
    (Internal universal preparation for mobile telephone, mobile telephone detection)
    7 � Video signal output, vertical and horizontal synchronisation
    (Internal universal preparation for mobile telephone, cradle and button evaluation)
    8 � Video signal ouput, green
    (Internal universal preparation for mobile telephone, cradle, aerial diagnosis)
    9 � Video signal input, RGBS, negative (ground)
    10 � Video signal input LF, right (Audio use 24 for ground)
    11 � Video signal input, screening earth
    12 � Video signal input, vertical and horizontal synchronisation
    13 � Video signal input, green
    14 � Not assigned
    15 � Not assigned
    16 � Not assigned
    17 - Video signal output, LF, negative (ground)
    18 � Video signal output LF, Left (Audio use 17 for ground)
    19 � Video signal output, RGBS, negative (ground)
    (Internal universal preparation for mobile telephone, cradle, negative)
    20 � Video signal output, Blue
    (Internal universal preparation for mobile telephone, switched terminal 30)
    21 � Video signal output, Red
    22 � Video signal input, LF, negative
    23 � Video signal input, LF, left (Audio use 24 for ground)
    24 � Video signal input, RGBS, negative (ground)
    25 � Video signal input, blue
    26 � Video signal input, red

    Connectors 6, aerial connectors
    1 � AM and FM2 radio reception aerial connector, double Fakra, no coding, impedance 50 ohms, colour cream-white

    2 � FM1 radio reception aerial connector, double Fakra, coding B, impedance 50 ohms, colour cream-white

    3 � Navigation aerial connector, double Fakra, coding C, impedance 50 ohms, colour signal blue