Alıntı ile CevaplaArazinin BABASI,Toyota'nın değer kaybetmeyen tek arabası.
Konuyu Değerlendir: Güncel Değerlendirme :
It's been a while since I got the time to do a big detail, so I decided to surprise a friend that left his car a my place when he went away on a trip for a few days. Truth be told, I felt more sorry for his pregnant wife that has to put up with it!
The car in question is a Toyota Landcruiser 100 series, very rough looking, heavily scratched daily driver, used for bashing it's own tracks through the Australian outback on the weekends. Oh, it's also got 320,000kms on the clock too! The colour is a nice shade of oxidised white!
Hard to capture most stuff on this car in photo's, but hopefully you'll get the idea...
This is how the car presented itself. I don't think its been washed for a few years!
Oh no! Looks like a challenge has presented itself right here!
I jumped right in and gave it a good foaming with degreaser. You can see a ton of crap coming off the car!
Rear after foam. Still covered in crud!
Nice 50/50 when washing!
Side marks after washing. This is going to be fun removing!
Wolfs Decon Gel working away. I thought I would have got more of a reaction, but most of the crap was removed with the degreaser foam and wash stage.
New ArtDeShine poly clay
Nice colour Alfred, does it match your handbag?!?!
I first thought ÿep, another cheap chinese clay, looks the same as some clay I've already got..... But this one certainly feels different, and a bit firmer to the soft chinese clay I got.
Im tested the clay out with QD's and water, it seemed to work best with just a wet surface from water. It didn't stick or grab the paint either, which is a welcomed relief.
The clay easily removed the oxidation off the paint. Best thing with this new type of clay, this crap just washes off! Not too soft, not too hard, just right!
I really like it! Not bad at all! Best use with just water is a cost saving bonus!
Apparently, if you drop the clay, you can wash the dirt off and continue using it!Crap just washes off the clay, but no, i didn't try it. I'll certainly have to test this out on a scrap panel in the future!
Time to remove those horrible marks from down the side of the car.
For this, I tried out an Osren velvet pad. It's got the same cut as about 3000 grit sand paper, but finished very smooth, flat, and clear! Compounding to 95% LSP ready in one step!
I chose to use Meguiars Ultimate Compound with the Osren Pad on my trusty Flex rotary. I love this compound, it's zero dust, very easy to use, and gets an awesome finish too! It also smells like cinnamon!
Working away nicely! Note the big improvement in colour even with my crappy pics!
Mark gone from one door!
I continued on polishing out the car, and tried a few different combos too. I got given one of these new compounding pads to try too, much nicer to use than regular wool pads! No linting!
After compounding and testing out a few heavy cut combos, I tested out a few finishing combos and settled on HD Uno on a 3M blue pad. Impressive multi use polish this one!
A few fun 50/50's and before & afters!
Note the heavy scratching down the side! The whole car was like this!
All polished up and looking sweet!
Tyres were treated to ArtDeShine Hydrophobic Tyre Coat. A little oges a long way with this product, which is a good thing with these big tyres!
This was what the tyres looked like after the first wash and degreasing. They were degreased and scrubed again to get them back to black!
MUCH BETTER!!!
On to the interior. What a mess!!!
I ended up removing all the rubbish, giving the seats and floor a vacuum, then cleaning it up with a wash mit and soapy water! The windows were cleaned with 100% IPA too! (non-tint windows!)
The doors were next. The handles were covered in a sticky mess. I gave the doors a liberal spray with APC, then an agitation with a nail brush. They came up much better!
Now onto the coating!
This is the ArtDeShine 2-stage coating. It's designed to be safe and very easy to use for the home detailer, and that it certainly is!!
More info found here: http://www.detailingworld.co.uk/foru...d.php?t=287642
Prep was another wash to remove all polish residue, a wipe down with panel wipe, then a wipe down with Eraser.
Base coat is very nice to use. It feels similar to other quartz coatings I've used, which is a good thing. Apply around the panel, wait 5 minutes, and the residue buffs off very easily. Wait 2hrs, then apply the top coat!
Top coat is litterally wipe on wipe off! It couldn't be easier!
Haze from base coat.
All finished! WOW! Nice gloss!
A few outside shots. Hard to capture the 'look' on white outside, but it certainly looks nice!
Not bad for 320,000kms on the clock!
Oh, and remember those marks down the side?
Check out the colour difference in those last two photos! I hope you enjoyed reading, this sure was a lot of fun to detail!
649
It's been a while since I got the time to do a big detail, so I decided to surprise a friend that left his car a my place when he went away on a trip for a few days. Truth be told, I felt more sorry for his pregnant wife that has to put up with it!
The car in question is a Toyota Landcruiser 100 series, very rough looking, heavily scratched daily driver, used for bashing it's own tracks through the Australian outback on the weekends. Oh, it's also got 320,000kms on the clock too! The colour is a nice shade of oxidised white!
Hard to capture most stuff on this car in photo's, but hopefully you'll get the idea...
This is how the car presented itself. I don't think its been washed for a few years!
Oh no! Looks like a challenge has presented itself right here!
I jumped right in and gave it a good foaming with degreaser. You can see a ton of crap coming off the car!
Rear after foam. Still covered in crud!
Nice 50/50 when washing!
Side marks after washing. This is going to be fun removing!
Wolfs Decon Gel working away. I thought I would have got more of a reaction, but most of the crap was removed with the degreaser foam and wash stage.
New ArtDeShine poly clay
Nice colour Alfred, does it match your handbag?!?!
I first thought ÿep, another cheap chinese clay, looks the same as some clay I've already got..... But this one certainly feels different, and a bit firmer to the soft chinese clay I got.
Im tested the clay out with QD's and water, it seemed to work best with just a wet surface from water. It didn't stick or grab the paint either, which is a welcomed relief.
The clay easily removed the oxidation off the paint. Best thing with this new type of clay, this crap just washes off! Not too soft, not too hard, just right!
I really like it! Not bad at all! Best use with just water is a cost saving bonus!
Apparently, if you drop the clay, you can wash the dirt off and continue using it!
Time to remove those horrible marks from down the side of the car.
For this, I tried out an Osren velvet pad. It's got the same cut as about 3000 grit sand paper, but finished very smooth, flat, and clear! Compounding to 95% LSP ready in one step!
I chose to use Meguiars Ultimate Compound with the Osren Pad on my trusty Flex rotary. I love this compound, it's zero dust, very easy to use, and gets an awesome finish too! It also smells like cinnamon!
Working away nicely! Note the big improvement in colour even with my crappy pics!
Mark gone from one door!
I continued on polishing out the car, and tried a few different combos too. I got given one of these new compounding pads to try too, much nicer to use than regular wool pads! No linting!
After compounding and testing out a few heavy cut combos, I tested out a few finishing combos and settled on HD Uno on a 3M blue pad. Impressive multi use polish this one!
A few fun 50/50's and before & afters!
Note the heavy scratching down the side! The whole car was like this!
All polished up and looking sweet!
Tyres were treated to ArtDeShine Hydrophobic Tyre Coat. A little oges a long way with this product, which is a good thing with these big tyres!
This was what the tyres looked like after the first wash and degreasing. They were degreased and scrubed again to get them back to black!
MUCH BETTER!!!
On to the interior. What a mess!!!
I ended up removing all the rubbish, giving the seats and floor a vacuum, then cleaning it up with a wash mit and soapy water! The windows were cleaned with 100% IPA too! (non-tint windows!)
The doors were next. The handles were covered in a sticky mess. I gave the doors a liberal spray with APC, then an agitation with a nail brush. They came up much better!
Now onto the coating!
This is the ArtDeShine 2-stage coating. It's designed to be safe and very easy to use for the home detailer, and that it certainly is!!
More info found here: http://www.detailingworld.co.uk/foru...d.php?t=287642
Prep was another wash to remove all polish residue, a wipe down with panel wipe, then a wipe down with Eraser.
Base coat is very nice to use. It feels similar to other quartz coatings I've used, which is a good thing. Apply around the panel, wait 5 minutes, and the residue buffs off very easily. Wait 2hrs, then apply the top coat!
Top coat is litterally wipe on wipe off! It couldn't be easier!
Haze from base coat.
All finished! WOW! Nice gloss!
A few outside shots. Hard to capture the 'look' on white outside, but it certainly looks nice!
Not bad for 320,000kms on the clock!
Oh, and remember those marks down the side?
Check out the colour difference in those last two photos! I hope you enjoyed reading, this sure was a lot of fun to detail!
Arazinin BABASI,Toyota'nın değer kaybetmeyen tek arabası.
Araba ne haldeymiş yahu. O kadar zahmet verdiler anca bir şeylere benzedi.
2.186
Araba ne haldeymiş yahu. O kadar zahmet verdiler anca bir şeylere benzedi.
sonuç güzel de, arka tampon sökülüp atılmalı ya yenisi takılmalı ya da boyanmalı, ön sağ çamurluk düzeltilmeli....
3.016
sonuç güzel de, arka tampon sökülüp atılmalı ya yenisi takılmalı ya da boyanmalı, ön sağ çamurluk düzeltilmeli....
649
Herif arabasini arkadasina birakip bir kac gunlugune seyahate cikmis, arkadasi da supriz olarak arabasina detailing yapmis, var mi burada boyle yapacak birisi? Anahtari birakiyorum.
1.227
Herif arabasini arkadasina birakip bir kac gunlugune seyahate cikmis, arkadasi da supriz olarak arabasina detailing yapmis, var mi burada boyle yapacak birisi? Anahtari birakiyorum.
Bir de flexin su makinesine bitiyorum, seytan diyor paraya kiyip al, at evin bi kosesine...
1.227
Bir de flexin su makinesine bitiyorum, seytan diyor paraya kiyip al, at evin bi kosesine...
649
649
1.227
Sunucu Altyapısı: İşlemci:4 CPU | HDD:100 GBSSD | Bandwith:10000 GB | Ram:8 GB | Bağlantı:1000MBit 
